Fits Bobcat Gehl Cat 3 Skidsteer Mirrors - 2 Side and 1 Center Skid Steer Loader

Description

Store Categories
Store Categories
For Mazda
For Mazda 6
For 2014- Mazda 3(BM) Sedan
For Other
For Mazda 3 2009-2012
For 2014- Mazda 3 Hatchback
For CX-5
For Buick / Opel / Vauxhall
For Other
For Chrysler
fit other
fit Town & Country
fit 200 / 300
For Mitsubishi
For Land Rover
For Evoque
Other
For Discovery Sport
For Vogue
For FreelanderII/​LR2
For Cadillac
For Hyundai
For Sonata
For Elantra
For IX35
For Tucson
For Santa Fe
For Toyota & Lexus
For Prado
For Other
For RAV4
For 4 Runner
For Corolla
For Camry / Aurion
For Highlander/Kluger
For Tacoma
For VW
Polo
For Polo 2002-2009
For Polo 2010-2014
Jetta
For Jetta MK6(2012-2014)
For Jetta MK4
For Jetta MK5(2006-2012)
Touran & Caddy
Passat & CC
For Passat B5
For Passat B6
For Passat B7
VW other
Tiguan
Touareg
GTI
Golf
For Golf MK4(1998-2003)
For Golf MK7(2014-2017)
For Golf MK5(2004-2008)
For Golf MK6(2009-2013)
For Kia
For Sorento
For Ford
For Explorer
For Focus
For Fusion / Mondeo
For Ecosport
For F-150
For Escape
For Fiesta
For Benz
For B-Class
For C-Class
For R-Class
For GLK-Class
For E-Class
For GL-Class
For Other
For S-Class
For Hariey
Universal fit
For Jeep
For Wrangler
For Compass
For Patriot
For Grand Cherokee
For Jeep Renegade
For Cherokee
For Volvo
For S60
For XC60
For S40
Other
For XC90
For S80
For Nissan
For Other
For Rogue / X-Trail
For Sentra
For Murano
For Versa
Qashqai
For Dodge
fit RAM
fit other
fit Durango
fit Challenger / Charger
fit Journey
fit Caravan & Grand Caravan
Car Cover
For AUDI
AUDI other
A8
Q3
Q7
Q5
A6
For C6(2005-2011)
For A6 Other
For C5(1997-2004)
For C7(2012-2014)
A4
For A4 B6(2000-2005)
For A4 B8(2008-2012)
For A4 B7(2005-2008)
A3&A5
For Chevrolet / Holden
For Porsche
BMW
1 Series
X5
3 Series
X1
X3
5 Series
7 Series
Honda
For CR-V
For Civic
For Fit / Jazz
For Accord Sedan
For HR-V / VEZEL
For Other
Citroen
Suzuki
For S-Cross
For SX4
For Other
For Swift
Subaru
For Forester
For Other
For Outback
For XV
Other
Fits Bobcat Gehl Cat 3 Skidsteer Mirrors - 2 Side and 1 Center Skid Steer Loader
Product View
Detail
Features:
High Quality Glass:
This wide angle mirror provides a very sharp, clear view (NOT plastic so they will NOT yellow and scratch and loose clarity) and it is set in a rubber mount for shock & vibration resistances, plus it has a STAINLESS STEEL housing (not tin so they will not rust out).
High Standards:
These are a very high quality wide angle true glass mirror in rubber mount with a stainless steel housing and clear view., real glass & stainless steel 4 x 8 inch wide angle rear-view Mirror for all types of skidsteers, forklifts, loaders, and etc. with all mounting hardware and brackets included.
New:
100% New product in package (never been used or installed).
Adjustable
：The mirror pivots forwards and backwards on its "swing style" mount and can be adjusted left or right with the main back mount for the best rear view angle positioning. Convex for greater viewing area.
Easy Installation:
Including accessories, very easy to install and clean. Direct replacement, easy install, simple operation. Only need a couple of wrenches to install them. For machines without a cage they can also be mounted solid by screwing them directly to any desired location.
Specifications：
Type: Wide Angle Rearview Mirror
Condition : New
Material: Metallic
Equipment Make: Fits All Types
Model Year: All
Package Dimensions: 10"L x 8"W x 7"H
Package Weight: 2.5 lbs
Color: Natural
Compatible:
Rear-View Mirrors for all types of skidsteers, forklifts, loaders, and etc. with all mounting hardware and brackets included.
Compatible Equipment Make: Universal, Bobcat, Case, Case IH, Caterpillar, Club Car, EZ-Go, John Deere, Kubota, Massey Ferguson, New Holland
Compatible Equipment Type: Golf Cart, Backhoe Loader, Crane, Crawler Dozer, Excavator, Forklift, Skid Steer Loader, Snowcat, Tractor, Utility Vehicle, Wheel Loader
Attention：
We provide all stainless steel nuts and bolts for attaching them to the cage but if you decided to screw them directly to another location then you will need to provide a couple of your own sheet metal screws.
The OVER HEAD WIDE ANGLE mirror is also designed to clamp thru the cage....if you have over head glass it must be AT LEAST a 1/4" ABOVE the cage for room for the backing bracket and bolt heads...(may need to remove glass during installation if the glass is less than 3/4" above the cage to give yourself working room).
All of these mirrors help reduce the blind spots for safety.
Product Includes：
1 x Center Wide Angle Mirror (4" x 8")
1 x Left Side Wide Angle Mirror (5 inch diameter)
1 x Right Side Wide Angle Mirror (5 inch diameter)
1 x Installation Accessories Set（Bolts，Nuts，Lock Washer，Locking Nuts，Backing Plate）
Description:
The mirror pivots forwards and backwards on its "swing style" mount and can be adjusted left or right with the main back mount for the best rear view angle positioning.
Once you position and aim the mirror to your taste, our mount style allows you to completely LOCK in that position (if so desired) so that it will not loose it's adjusted view from the constant vibration and bouncing around that anyone who operates a skid steer is well aware of. The MOUNTING BRACKET and the BACKING BRACKET are also made from STAINLESS STEEL, as are ALL of the nuts, washers and bolts.
This high quality mirror comes with all the needed hardware to mount it to your machine (and complete instructions).
The bracket is designed to clamp thru the grate on the top of the cage of the machine so no drilling is required and the only tools you will need to install them are a couple of 7/16" wrenches.... and of course for machines without a cage it can also be mounted solid by screwing it directly to any desired location (please note, we provide all stainless steel nuts and bolts for attaching the mirror to the cage but if you decided to screw it directly to another location then you will need to provide a couple of your own sheet metal screws). The mounting bracket is designed for machines without glass enclosures or for machines that are equipped with a glass enclosure as long as the glass is approx. 3/4" ABOVE the overhead cage.
If the glass is 3/4" above the cage you will be able to mount the mirror without glass removal.
This mirror will greatly help reduce the blind spots for safety and they will give you a nice wide rear viewing area.
No drilling: our mirrors do not just slap onto your machine with a couple of sheet metal screws....we include a stainless steel backing bracket along with stainless steel nuts and bolts that clamp thru the cage of your machine so that no drilling into your expensive machine.
*Direct shipment from the United States provides you with high-quality products and cost-effective price.
Note：
*Actual commodity to prevail in kind. Please allow 0.5-1 inch difference due to manual measurement. *Please be sure to verify the Year/Make/Model applicable information properly before ordering, If you have any issues about the model, just contact with us!
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
We only ship to your verified
eBay addresses
.
Usually, we will be shipping and upload tracking number within
24-48
hours after your complete the order payment.Our default shipping type there: USPS, Fedex & UPS.
Payment Method
Returns Policy
Copyright © 2017 DataCaciques
Home
Payment
Shipping
About us
Contact us
PRODUCT DESCRIPTION
Features:
High Quality Glass:
This wide angle mirror provides a very sharp, clear view (NOT plastic so they will NOT yellow and scratch and loose clarity) and it is set in a rubber mount for shock & vibration resistances, plus it has a STAINLESS STEEL housing (not tin so they will not rust out).
High Standards:
These are a very high quality wide angle true glass mirror in rubber mount with a stainless steel housing and clear view., real glass & stainless steel 4 x 8 inch wide angle rear-view Mirror for all types of skidsteers, forklifts, loaders, and etc. with all mounting hardware and brackets included.
New:
100% New product in package (never been used or installed).
Adjustable
：The mirror pivots forwards and backwards on its "swing style" mount and can be adjusted left or right with the main back mount for the best rear view angle positioning. Convex for greater viewing area.
Easy Installation:
Including accessories, very easy to install and clean. Direct replacement, easy install, simple operation. Only need a couple of wrenches to install them. For machines without a cage they can also be mounted solid by screwing them directly to any desired location.
Specifications：
Type: Wide Angle Rearview Mirror
Condition : New
Material: Metallic
Equipment Make: Fits All Types
Model Year: All
Package Dimensions: 10"L x 8"W x 7"H
Package Weight: 2.5 lbs
Color: Natural
Compatible:
Rear-View Mirrors for all types of skidsteers, forklifts, loaders, and etc. with all mounting hardware and brackets included.
Compatible Equipment Make: Universal, Bobcat, Case, Case IH, Caterpillar, Club Car, EZ-Go, John Deere, Kubota, Massey Ferguson, New Holland
Compatible Equipment Type: Golf Cart, Backhoe Loader, Crane, Crawler Dozer, Excavator, Forklift, Skid Steer Loader, Snowcat, Tractor, Utility Vehicle, Wheel Loader
Attention：
We provide all stainless steel nuts and bolts for attaching them to the cage but if you decided to screw them directly to another location then you will need to provide a couple of your own sheet metal screws.
The OVER HEAD WIDE ANGLE mirror is also designed to clamp thru the cage....if you have over head glass it must be AT LEAST a 1/4" ABOVE the cage for room for the backing bracket and bolt heads...(may need to remove glass during installation if the glass is less than 3/4" above the cage to give yourself working room).
All of these mirrors help reduce the blind spots for safety.
Product Includes：
1 x Center Wide Angle Mirror (4" x 8")
1 x Left Side Wide Angle Mirror (5 inch diameter)
1 x Right Side Wide Angle Mirror (5 inch diameter)
1 x Installation Accessories Set（Bolts，Nuts，Lock Washer，Locking Nuts，Backing Plate）
Description:
The mirror pivots forwards and backwards on its "swing style" mount and can be adjusted left or right with the main back mount for the best rear view angle positioning.
Once you position and aim the mirror to your taste, our mount style allows you to completely LOCK in that position (if so desired) so that it will not loose it's adjusted view from the constant vibration and bouncing around that anyone who operates a skid steer is well aware of. The MOUNTING BRACKET and the BACKING BRACKET are also made from STAINLESS STEEL, as are ALL of the nuts, washers and bolts.
This high quality mirror comes with all the needed hardware to mount it to your machine (and complete instructions).
The bracket is designed to clamp thru the grate on the top of the cage of the machine so no drilling is required and the only tools you will need to install them are a couple of 7/16" wrenches.... and of course for machines without a cage it can also be mounted solid by screwing it directly to any desired location (please note, we provide all stainless steel nuts and bolts for attaching the mirror to the cage but if you decided to screw it directly to another location then you will need to provide a couple of your own sheet metal screws). The mounting bracket is designed for machines without glass enclosures or for machines that are equipped with a glass enclosure as long as the glass is approx. 3/4" ABOVE the overhead cage.
If the glass is 3/4" above the cage you will be able to mount the mirror without glass removal.
This mirror will greatly help reduce the blind spots for safety and they will give you a nice wide rear viewing area.
No drilling: our mirrors do not just slap onto your machine with a couple of sheet metal screws....we include a stainless steel backing bracket along with stainless steel nuts and bolts that clamp thru the cage of your machine so that no drilling into your expensive machine.
*Direct shipment from the United States provides you with high-quality products and cost-effective price.
Note：
*Actual commodity to prevail in kind. Please allow 0.5-1 inch difference due to manual measurement. *Please be sure to verify the Year/Make/Model applicable information properly before ordering, If you have any issues about the model, just contact with us!
PRODUCT VIEW
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
Normally we use UPS, Fedex and USPS to dispatch package(s). And we don't provide pick-up service.
Tracking number will be provided for you to track your package(s).
We do not ship to Hawaii, Alaska, Puerto Rico, PO Boxes, Apo's, FPO's, or Military Mail Boxes.
Payment Method
PayPal, PayPal Credit, Credit card or debit card, Apple Pay, Google Pay which are offered at eBay checkout, are allowed due to payment security and customer convenience concern. To accelerate the shipping process, please clear your payment ASAP after placing the order.
Returns Policy
Returns are accepted up to 30 days from the purchased date.
If you want to return the item, please contact customer service for RMA# (Return Merchandise authorization).
The returned package(s) must be in original package with all packaging material.
Please be sure to notify us of your return tracking number upon shipping your item back.
On Nov-05-21 at 01:31:24 PDT, seller added the following information: